Yamaha RX-V2500 Owner's Manual page 70

SYSTEM OPTIONS
To recall settings
1
Set AMP/SOURCE/TV to AMP.
SOURCE
2
Press TOP on the remote control.
3
Select System Memory, then press h.
Current
Memory 1
Memory 2
Memory 3
4
Select Load, then press ENTER.
5
Press k / n repeatedly to select the memory
number you want to recall, then press h.
"Load: ENTER" appears in the bottom right corner of
the window.
6
Press ENTER to recall the settings.
y
Memory 1 and Memory 2 settings can be recalled simply by
pressing MEMORY 1/2 on the remote control.
When you press MEMORY 1, the message "Load Memory 1?
Yes:Press Again" appears in the front panel display. Press
MEMORY 1 once more to recall the settings.
1 MEMORY
9
When you press MEMORY 2, the message "Load Memory 2?
Yes: Press Again" appears in the front panel display. Press
MEMORY 2 once more to recall the settings.
1 MEMORY
9
68
AMP
TV
The Bottom Line
Speaker A:ON B:OFF
SpeakerCH 3/4/0.1
LFE Level 0dB
D-Range MAX
PEQ Reset
2
0
2
0