Step 4: Outlet Pipe - Toyotomi TRN-828ZR User Manual

Installation of indoor unit
NOTE
•
Pay attention to dust prevention and take
relevant safety measures when opening
the hole.
•
The plastic expansion particles are not
provided and shpould be bought locally.

Step 4: outlet pipe

1. The pipe can be led out in the
direction of right, rear right,
left or rear left.
rear right
right
Step 5: connect the pipe of
indoor unit
1. Aim the pipe joint at the corresponding
bellmouth.
2. Pretightening the union nut with hand.
3. Adjust the torque force by referring to the
following sheet. Place the open-end wrench
on the pipe joint and place the torque wrench
on the union nut. Tighten the union nut with
torque wrench.
left
rear left
Indoor
5-10º
2. When select leading out the pipe
from left or right, please cut off the
corresponding hole on the bottom
case.
left
pipe joint
36
Outdoor
ф55/
ф70
Right
cut off
the hole
union nut pipe
GB