Take the device and the operating instructions out of the cardboard
box.
Remove all packaging materials and protective films from the device
before first use, especially the protective film at the bottom side of the
device.
NOTE:
Keep the original packaging during the warranty and / or
guarantee period of the device so that you can dispatch the
device in case of warranty and / or guarantee properly
packed. Transport damages will cause the warranty and / or
guarantee claim to expire.
Operation
Charging the battery
Before using, fully charge the battery using the supplied USB cable.
Connect the "DC5V"charging slot to any USB port supplying power
(Laptop, Computer, AC Charger, Car Charger, etc.).
A solid red LED indicates that the speaker is charging, it will turn off
when fully charged.
NOTE
The charging time takes approx. 2.5-3 hours.
Bluetooth Pairing
With the device turned on, it comes to pairing mode with flashing blue
light. Open the Bluetooth settings of your phone, tablet or other
Bluetooth enabled audio device and select "ABTS-MS89" Stereo.
When prompted for the pairing code, enter 0000. Once paired, one
solid blue LED light will be on.
Twins connecting function:
Step 1: Booting: Power on the two units, the blue indicated LED is
shining.
Step2: Press the button "M" at the same time, the blue indicated LED
will be long light, which means twins connected mutually.
Step3: Open your device (Cellphone/Laptop), search for the Bluetooth
paring name, click and connect.
Remark:
If TWS function is used for the first time press "M" to enter TWS
function. To use TWS you need two speakers. Turn both on and be kind
4