Chapter Preparations; Description Of Components - Toshiba e-STUDIO330AC Quick Start Manual

Chapter 1 PREPARATIONS

Description of Components

This section describes the names and operations of the equipment.
Front / Right side
1.
Dual Scan Document Feeder
Scans both sides of the original one sheet at a
time.
& Specifications Guide (PDF) : "Chapter 2:
SPECIFICATIONS OF EQUIPMENT"
2.
Automatic duplexing unit
Prints on both sides of the paper. Open when
paper misfeeds occur.
3.
Bypass tray
For printing on special media types such as OHP
film.
& P.31 "Bypass copying"
4.
Paper feed cover
Open to clear misfed paper in the Paper Feed
Unit or Large Capacity Feeder.
8
8, 9
1
7
6
5
5.
6.
7.
8.
9.
2
3
4
Paper Feed Unit or Large Capacity Feeder
The Paper Feed Unit adds one drawer.
You can load A4, LT, LG or 13"LG size paper in the
Large Capacity Feeder.
& Specifications Guide (PDF) : "Chapter 3:
SPECIFICATIONS OF OPTIONS"
Drawer
Load paper in the drawer.
& P.18 "Placing Paper and Originals"
& Specifications Guide (PDF) : "Chapter 3:
SPECIFICATIONS OF OPTIONS"
Front cover
Open when replacing the toner cartridge.
Document lamp (Blue)
Lights when originals are placed in the Dual Scan
Document Feeder.
Alarm lamp (Orange)
Lights when a paper misfeed has occurred in the
Dual Scan Document Feeder.