Chapter Preparations; Description Of Each Component - Toshiba e-studio2555c Quick Start Manual

Multifunctional digital color systems
Hide thumbs Also See for e-studio2555c:
Table of Contents

Advertisement

Chapter 1 PREPARATIONS

Description of Each Component

This section describes the names and operations of the equipment, control panel and touch panel.
Front / Right side
1.
Reversing Automatic Document Feeder
The stack of originals is scanned one sheet at a time. Both
sides of the originals can be scanned. A maximum of 100
sheets (80 g/m
2
(The maximum number of sheets that can be set may vary
depending on the media type of the originals.)
2.
Operator's Manual Pocket (back side)
Keep the manual in this pocket.
3.
USB port
Use this connector when printing files stored in a USB
device or storing scanned data into the USB device. The
Front USB Cable is required for using the USB port.
4.
USB terminal (4-pin)
Use this terminal when connecting this equipment to a PC
with a commercially available USB cable.
5.
Network interface connector
Use this connector when connecting this equipment to a
network.
6.
Automatic duplexing unit
This unit makes copies on both sides of the paper. Open it
when paper misfeeds occur.
7.
Bypass tray
Use this to perform printing on special media types such
as OHP film, etc.
& P.23 "Bypass copying" in this manual
6
17 16
15
14
13
12
or 20 lb. Bond) can be placed in one go.
1
Back side
2
3
6
7
8
9
10
11
8.
Paper holding lever
Use this to place paper on the bypass tray.
9.
Paper feed cover (of the equipment)
Open this cover when releasing paper misfed in the
drawer feeding area.
10.
Paper feed cover
Open this cover when releasing paper misfed in the Paper
Feed Pedestal or Large Capacity Feeder.
11.
Paper size indicator
The size of the paper set in the drawer can be checked.
12.
Paper Feed Pedestal and Additional Drawer
Module or Large Capacity Feeder
Use the Paper Feed Pedestal to add one drawer. The
Additional Drawer Module can be installed in this device.
A maximum of 550 sheets (80 g/m
paper can be placed in one go.
A maximum of 2000 sheets (80 g/m
plain paper can be placed in the Large Capacity Feeder.
13.
Drawer
A maximum of 550 sheets of plain paper can be placed in
one go.
& P.15 "Placing paper" in this manual
14.
Front cover
Open this cover when you replace the toner cartridge and
clean the charger.
3
4
5
or 20 lb. Bond) of plain
2
or 20 lb. Bond) of
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents