Toshiba e-STUDIO330AC Quick Start Manual page 21

6 A list of discovered printers is displayed.
2
and click [OK].
7 When the installation is complete, click [Finish].
For details of the recommended installation, see the following guide:
& Software Installation Guide (PDF) : "Chapter 2: RECOMMENDED INSTALLATION"
8 Click [Exit] and then [Yes].
Setting the printer driver
Before using the printer driver, you must configure the options installed.
1
Select the [Start] menu > [Settings] > [Devices] > [Devices and printers].
2 Right-click on TOSHIBA Universal Printer 2, and then click [Printer
properties].
Obtain configuration data of the options automatically by opening the
3
[Device Settings] tab menu.
4 Click [OK].
Installing Client Software
1
Select this equipment on the list
1
21