Toshiba e-STUDIO330AC Quick Start Manual page 42

Chapter 2 BASIC OPERATIONS
Printing documents using the bypass tray
The following explains how to print documents from a computer using the bypass tray.
1 Select [Print] in the [File] menu of the application.
2 Select the printer driver of the equipment, and then click [Preferences]
([Properties]).
3 Select the [Basic] tab menu in the printer driver.
4 Select the document size in [Original Paper Size].
5 Select the paper size in [Print Paper Size].
If you do not want to enable enlarged or reduced printing, select [Same as Original Size].
6 Select [Bypass Tray] in [Paper Source].
7
Select the paper type to be fed from the bypass tray in [Paper Type].
• When printing documents is attempted with thick paper and so on (other than plain paper),
click [Paper Type] to specify the paper type.
• For more information about the paper types, refer to the Specification Guide.
8 Set other printing functions as needed, and then click [OK].
9 Click [Print] ([OK]) of the application.
10 Place paper face down on the bypass tray of the equipment.
& P.31 "Bypass copying"
11 Press Job Status button on the home screen.
12 When "Select the drawer or bypass tray." is displayed on the touch panel,
press [Bypass Feed].
13 Press the [START] button on the control panel.
42