Personnel Qualifications; General Safety Instructions - Bosch Rexroth Hägglunds CA Series Installation And Maintenance Manual

Bosch Rexroth Mellansel AB, Installation and maintenance manual, Hägglunds CA 10 - CA 40, RE 15354-WA/04.2015
• Use of add-on parts (e.g. mountable filter, control unit, valves) that are not
specified by Bosch Rexroth has to be approved by contact at Bosch Rexroth.
• Extension or conversion is not permissible and has to be approved by contact at
Bosch Rexroth.
• Using the Radial piston motor under water without necessary additional measures.
• Using the Radial piston motor when the exterior pressure is greater than the
interior pressure (case pressure).
• Using the Radial piston motor in explosive environments unless the component or
machine/system has been certified as compliant with the ATEX directive 94/9/EC.
• Using the Radial piston motor in an aggressive atmosphere without necessary
additional measures.

2.4 Personnel qualifications

The activities described in this documentation require basic mechanical, electrical
and hydraulic knowledge, as well as knowledge of the associated technical terms.
For transporting and handling the product, additional knowledge is necessary with
regard to working with a lifting device and the corresponding attachment equipment.
In order to ensure safe use, these activities may therefore only be carried out by
appropriate qualified personnel or an instructed person under the direction and
supervision of qualified personnel.
Qualified personnel are those who can recognize possible hazards and institute
the appropriate safety measures due to their professional training, knowledge, and
experience, as well as their understanding of the relevant regulations pertaining
to the work to be done. Qualified personnel must observe the rules relevant to the
subject area and have the necessary hydraulic knowledge.
Hydraulic knowledge means, for instance:
• reading and fully understanding hydraulic diagram,
• fully understanding in particular the interrelationships regarding safety devices and
having knowledge on the function and assembly of hydraulic components.
Bosch Rexroth offers training support for special fields. For more information about
training, please contact your Bosch Rexroth representative.

2.5 General safety instructions

• Follow current accident prevention and environmental protection rules.
• Observe the safety rules and regulations of the country in which the product is
used.
• Do not use Bosch Rexroth products unless they are in perfect working order.
• Follow all the instructions on the product.
• Persons who install, operate, remove or maintain Bosch Rexroth products must
not consume any alcohol, drugs or pharmaceuticals that may affect their ability to
respond.
• Use only Bosch Rexroth spare parts to avoid the risk of personal injury through
using unsuitable parts.
• Comply with the technical data and ambient conditions stated in the product
documentation.
• If unsuitable products are fitted or used in safety-critical applications, unintended
operating conditions may arise which could cause personal injury and damage to
property. So do not use a product for safety-critical applications unless that use is
Safety instructions 9/52