Vitek VT-1416 W Manual Instrucitons page 5

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Insert the power plug into the mains socket.
Switch the mixer on with the switch (2) setting
the attachment rotation speed from «1» to «5»
(see the table). To switch the maximal rotation
speed on during the mixer operation, press
and hold the «TURBO» button (1).
Do not hinder rotation of the bowl (12) during
the unit operation.
After the unit operation is finished, set the switch
(2) to the position «0» and unplug the unit.
Press and hold down the button (11), lift the
support (8) and release the button (11).
Press and hold down the button (9), remove
the mixer (4) from the support (8).
Hold the hooks (6) or the beaters (7) with one
hand, press the attachment release button (3)
with the other and remove the attachments.
Remove the bowl (12) from the base (10).
Note: You can use the unit as a handheld mixer;
for this install the hooks (6) or beaters (7) and
use a suitable bowl.
RECOMMENDED OPERATION MODES
Speed
1, 2
Mixing dry ingredients.
Making mashed vegetables
and different sauces. Mixing
2, 3
ingredients for dough (e.g. butter
with sugar) and kneading dough.
Making "light" dough for biscuits,
3, 4
puddings etc.
4, 5,
Beating – e.g. cream, milk, egg
«TURBO»
whites or egg whites with yolks.
CLEANING AND CARE
Switch the unit off and unplug it.
Wash the hooks (6) or beaters (7) and the
bowl (12) with warm water and a neutral deter-
gent, then dry them.
Clean the mixer body (4) and base (10) with a
soft, slightly damp cloth, and then wipe it dry.
IM VT-1416.indd 5
Do not immerse the mixer body (4), power
cord and plug into water or any other liquids.
Provide that no water or detergent gets inside
the support (8).
Use neutral detergents to remove dirt; do not
use metal brushes, abrasive detergents and
solvents.
STORAGE
Clean the unit.
Keep the unit away from children in a dry cool
place.
DELIVERY SET
Mixer – 1 pc.
Base – 1 pc.
Bowl – 1pc.
Beaters – 2 pc.
Dough hooks – 2 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Supply voltage: 220-240 V ~ 50 Hz
Power consumption: 700 W
The manufacturer preserves the right to change
the specifications of the unit without a prelimi-
nary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
5
ENGLISH
27.02.2017 10:09:16

Advertisement

Table of Contents
loading

Table of Contents