Multifunction Lever; Daytime Running Lights (Drls); High/Low Beam Switch; Automatic High Beam - If Equipped - Jeep GRAND CHEROKEE 2021 Owner's Manual

To turn on the headlights, rotate the headlight
switch clockwise. When the headlight switch is
on, the parking lights, taillights, license plate
light and instrument panel lights are also turned
on. To turn off the headlights, rotate the
headlight switch back to the O (off) position.
NOTE:
Your vehicle is equipped with plastic head-

light and fog light (if equipped) lenses that
are lighter and less susceptible to stone
breakage than glass lights. Plastic is not as
scratch resistant as glass and therefore
different lens cleaning procedures must be
followed.
To minimize the possibility of scratching the

lenses and reducing light output, avoid
wiping with a dry cloth. To remove road dirt,
wash with a mild soap solution followed by
rinsing.
CAUTION!
Do not use abrasive cleaning components,
solvents, steel wool or other abrasive
materials to clean the lenses.
M L
ULTIFUNCTION EVER
The multifunction lever is located on the left
side of the steering column.

Multifunction Lever

D R L
AYTIME UNNING IGHTS
The Daytime Running Lights (DRLs) (low
intensity) come on whenever the engine is
running, and the transmission is not in the
PARK position. The lights will remain on until the
ignition is placed in the OFF or ACC position, or
the parking brake is engaged.
NOTE:
If a turn signal is activated, the DRL lamp on

the same side of the vehicle will turn off for
the duration of the turn signal activation.
GETTING TO KNOW YOUR VEHICLE
Once the turn signal is no longer active, the
DRL lamp will illuminate.
The DRLs function may be disabled through

the Uconnect system Ú page 171.
NOTE:
For vehicles sold in Canada, the Daytime
Running Lights will automatically deactivate
when the front fog lights are turned on.
H /L
IGH OW
Push the multifunction lever toward the
instrument panel to switch the headlights to
high beams. Pulling the multifunction lever
back will turn the low beams on.
(DRL )
S
A
UTOMATIC
The Automatic High Beam Headlamp Control
system provides increased forward lighting at
night by automatically controlling the high
beams through the use of a camera mounted
on the inside rearview mirror. This camera
detects vehicle specific light and automatically
switches from high beams to low beams until
the approaching vehicle is out of view.
49
B S
EAM WITCH
H B — I E
IGH EAM F QUIPPED
2