Related Manuals for Gold Medal UNIFLOSS
Summary of Contents for Gold Medal UNIFLOSS
- Page 1 Part No. 13054 UNIFLOSS Floss Stand Instruction Manual Models 3034, 3034GT, 3035, 3035BC, 3035BN Cincinnati, OH 45241-4807 USA...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS DANGER Machine must be properly grounded to prevent electrical shock to personnel. Failure to do so could result in serious injury, or death. DO NOT immerse any part of this equipment in water. DO NOT use excessive water when cleaning. Keep cord and plug off the ground and away from moisture. - Page 3 007_010914 Note: Improvements are always being made to Gold Medal’s equipment. This information may not be the latest available for your purposes. It is critical that you call Gold Medal’s Technical Service Department at 1-800-543-0862 for any questions about your machine operations, replacement parts, or any service questions.
-
Page 4: Electrical Requirements
For in-counter installations, place the top section of the Unifloss Stand over a cut-out in your countertop. A shelf is required under the counter to set the floss machine on. For countertop cut-out size and shelf location, request drawing numbers B-3374 and C-3418 from Gold Medal Products Company. - Page 5 Gold Medal Watchdog Stainless Cleaner (Item No. 2088). DO NOT use oven cleaners or abrasive materials as they will damage parts of machine. 3. Clean glass panels with glass cleaner. Gold Medal Watchdog Glass Cleaner (Item No. 2588) is recommended.
-
Page 6: Maintenance Instructions
Unifloss Floss Stands MAINTENANCE INSTRUCTIONS THE FOLLOWING SECTIONS OF THIS MANUAL ARE INTENDED ONLY FOR QUALIFIED SERVICE PERSONNEL WHO ARE FAMILIAR WITH ELECTRICAL EQUIPMENT. THESE ARE NOT INTENDED FOR THE OPERATOR. Adequate eye protection must be used when servicing this equipment to prevent the possibility of injury. - Page 7 Unifloss Floss Stands PARTS LIST - MINI UNIFLOSS STANDS 3034 3034GT Mini Gold Mini Part No. Part No. Description 13154 13154 Glass retaining strip, front 13155 13155 Glass retaining strip, rear 13002 13004 Top extrusion frame 13085 13085 Base cabinet...
- Page 8 Unifloss Floss Stands PARTS LIST - UNIFLOSS STANDS #3035BC #3035 Back Counter Part No. Part No. Description 12072 12072 End cap 13002 13002 Top frame 13003 13003 Bottom frame 13009 13009 Fan blade 13010 13010 Motor fan 13013 13013 Aluminum mesh filter...
- Page 9 Unifloss Floss Stands PARTS LIST - NEON UNIFLOSS STANDS #3035BN Part No. Description 12072 End cap 13002 Top frame 13003 Bottom frame 13009 Fan blade 13010 Motor fan 13013 Aluminum mesh filter 13028 Fan mount bracket 13036 Protective cover for light tube...
-
Page 10: Wiring Diagram
Unifloss Floss Stands WIRING DIAGRAM #3034, #3035 ODELS... -
Page 11: Warranty
© 2017 – The text, descriptions, graphics, layout, and other material in this publication are the exclusive property of Gold Medal Products Co. and shall not be used, copied, reproduced, or published in any fashion, including website display, without its express written consent.
Need help?
Do you have a question about the UNIFLOSS and is the answer not in the manual?
Questions and answers