Table of Contents
Advertisement
IN-HOME LIMITED WARRANTY
NeoChiller
2-YEAR WARRANTY
F-4N1
5-YEAR WARRANTY
F-HC1100
2-YEAR WARRANTY
F-C1100
2-YEAR WARRANTY
Filtration system (excluding replaceable filtration cartridge)
1-YEAR WARRANTY
This limited warranty is provided by InSinkErator, a business unit of Emerson Electric Co., ("InSinkErator" or "Manufacturer" or "we" or "our" or "us") to the
original consumer owner of the InSinkErator product with which this limited warranty is provided (the "InSinkErator Product"), and any subsequent owner
of the residence in which the InSinkErator Product was originally installed ("Customer" or "you" or "your").
InSinkErator warrants to Customer that your InSinkErator Product will be free from defects in materials and workmanship, subject to the exclusions
described below, for the "Warranty Period", commencing on the later of: (a) the date your InSinkErator Product is originally installed, (b) the date of
purchase, or (c) the date of manufacture as identified by your InSinkErator Product serial number. You will be required to show written documentation
supporting (a) or (b). If you are unable to provide documentation supporting either (a) or (b), the Warranty Period commencement date will be determined
by Manufacturer, in its sole and absolute discretion, based upon your InSinkErator Product serial number.
Permitted Uses
You may use your InSinkErator Product hot/cold water tank and filter system in combination with any genuine InSinkErator Product instant hot water
dispensers and component parts and/or Authorized OEM Products. "Authorized OEM Products" mean those hot or hot/cold water dispensers and
component parts that have been manufactured by an authorized InSinkErator original equipment manufacturer ("Authorized OEM") and which have
documentation expressly stating that such Authorized OEM Products are compatible with the InSinkErator Product(s). Authorized OEMs may change from
time to time. A list of Authorized OEMs is available to you upon request or at: www.insinkerator.com/oem. Use of your InSinkErator Product in combination
with any products other than Authorized OEM Products will void this warranty.
What is Covered
This limited warranty covers defects in materials or workmanship, subject to the exclusions below, in InSinkErator Products used by a consumer Customer
for residential use only, and includes all replacement parts and labor costs. YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY
SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE INSINKERATOR PRODUCT, PROVIDED THAT IF WE DETERMINE IN OUR SOLE
DISCRETION THAT NEITHER REMEDY IS PRACTICABLE, WE MAY PROVIDE YOU A REFUND OF YOUR PURCHASE PRICE OR A CREDIT TOWARDS
ANOTHER INSINKERATOR PRODUCT.
What is not Covered
This limited warranty does not extend to and expressly excludes:
•
Losses or damages or the inability to operate your InSinkErator Product resulting from conditions beyond the Manufacturer's control including, without
limitation, accident, alteration, misuse, abuse, neglect, negligence (other than Manufacturer's), failure to install, maintain, assemble, or mount the
InSinkErator Product in accordance with Manufacturer's instructions or local electrical and plumbing codes.
•
Wear and tear expected to occur during the normal course of use, including without limitation, cosmetic rust, scratches, dents or comparable and
reasonably expected losses or damages.
•
Losses or damages caused by any product or component part used with the InSinkErator Products, including both Authorized OEM Products and other
products and components.
In addition to the above exclusions, this warranty does not apply to InSinkErator Products installed in a commercial or
industrial application.
No Other Express Warranty Applies
This limited warranty is the sole and exclusive warranty provided to the Customer identified above. No other express warranty, written or verbal, applies.
No employee, agent, dealer, or other person is authorized to alter this limited warranty or make any other warranty on behalf of Manufacturer. The terms
of this limited warranty shall not be modified by the Manufacturer, the original owner, or their respective successors or assigns.
What we will do to Correct Problems
If your InSinkErator Product does not operate in accordance with the documentation provided to you, or you have questions concerning your InSinkErator
Product or how to determine when service is needed, please contact the Authorised InSinkErator service centre for your area as identified on the
backcover of this manual.
The following information must be provided as part of your warranty claim: your name, address, phone number, your InSinkErator Product model and
serial number, and if necessary, upon request, written confirmation of either: (a) the date shown on your installation receipt, or (b) the date shown on your
purchase receipt.
Manufacturer or its authorized service representative will determine, in its sole and absolute discretion, if your InSinkErator Product is covered under
this warranty. You will be given the contact information for your closest authorized InSinkErator Service Center. Please contact your InSinkErator Service
Center directly to receive in home warranty repair or replacement service. Only an authorized InSinkErator service representative may provide warranty
service. InSinkErator is not responsible for warranty claims arising from work performed on your InSinkErator Product by anyone other than an authorized
InSinkErator service representative.
If a covered claim is made during the Warranty Period, Manufacturer will, through its authorized service representative, either repair or replace your
InSinkErator Product. Cost of replacement parts or a new InSinkErator Product, and cost of labor for repair or installation of the replacement InSinkErator
Product are provided at no cost to you. Repair or replacement shall be determined by Manufacturer or its authorized service representative in their sole
discretion. All repair and replacement services will be provided to you at your home. If Manufacturer determines that your InSinkErator Product must
be replaced rather than repaired, the warranty on the replacement InSinkErator Product will be limited to the unexpired term remaining in the original
Warranty Period.
This water chilling system / NeoChiller is covered by Manufacturer's limited warranty. This limited warranty is void if you attempt to repair the InSinkErator
Product. For service information, please contact the Authorised InSinkErator service centre for your area as identified on the backcover of this manual.
Limitation of Liability
TO THE EXTENT PERMITTED BY LAW, IN NO EVENT SHALL MANUFACTURER OR ITS AUTHORIZED SERVICE REPRESENTATIVES BE LIABLE FOR ANY
INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, INCLUDING ANY ECONOMIC LOSS, WHETHER RESULTING FROM NONPERFORMANCE,
USE, MISUSE OR INABILITY TO USE THE INSINKERATOR PRODUCT OR THE MANUFACTURER'S OR ITS AUTHORIZED SERVICE REPRESENTATIVE'S
NEGLIGENCE. MANUFACTURER SHALL NOT BE LIABLE FOR DAMAGES CAUSED BY DELAY IN PERFORMANCE AND IN NO EVENT, REGARDLESS OF THE FORM
OF THE CLAIM OR CAUSE OF ACTION (WHETHER BASED IN CONTRACT, INFRINGEMENT, NEGLIGENCE, STRICT LIABILITY, OTHER TORT OR OTHERWISE),
SHALL MANUFACTURER'S LIABILITY TO YOU EXCEED THE PRICE PAID BY THE ORIGINAL OWNER FOR THE
INSINKERATOR PRODUCT.
The term "consequential damages" shall include, but not be limited to, loss of anticipated profits, business interruption, loss of use or revenue, cost of
capital or loss or damage to property or equipment.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.
This limited warranty gives you specific legal rights and you may also have other rights which vary from state to state.
16
ROUTINE MAINTENANCE
SUBJECT
HOW
Cleaning the outside of the
•
Clean the external part with a damp cloth, do not use solvents or
appliance
abrasive detergents.
•
Remove all dust and dirt with a domestic vacuum cleaner
Cleaning the cooling condenser (H
or similar appliance.
on page 8)
•
Do not use compressed air jets.
•
Do not use wire brushes.
•
Switch the apparatus off and wait about 1 hour for it to
defrost.
Water replacement in the ice bank
•
Empty the water using the level and basin unloading tube D
tank
•
Restore the water level in the ice bank tank as described
in page 9.
Power lead
•
Check the condition and intactness of the power lead.
•
Check the condition and intactness of the water supply
Water connection check
pipe.
•
Check for any leak.
FILTER GUIDE AND REPLACEMENT
Replace filter cartridge when there is an obvious decrease in water flow to the tap or if there is an objectionable taste or odour to the water.
•
When the inlet and outlet ports have been closed and the filter's
internal pressure has been relieved, water (about 60ml) will
discharge from vent line.
Filter replacement instructions:
1. Replace with an InSinkErator
®
filter.
2. Place pan or dish towel under the filter to catch water drainage
during change.
3. Slowly turn the cartridge anticlockwise
completely until it stops (1/4 turn).
4. Pull cartridge straight down and discard.
5. Insert new cartridge into filter head.
CARE AND USE
WARNING: Electric Shock Hazard. To prevent electrical shock, disconnect power before servicing unit. Use only a properly grounded
!
and polarized electric outlet.
PROPERTY DAMAGE
•
Regularly inspect the unit for any signs of leakage. If there are signs of water damage, immediately remove the unit from service.
•
A drain pan, plumbed to an appropriate drain or outfitted with a leak detector, should be used in those applications where any leakage could
cause property damage.
CLEANING THE TAP
•
Only use mild cleaners to clean the tap and
plastic components.
PERSONAL INJURY
•
Regularly check for signs of corrosion by examining
the appearance of the dispensed water.
HOW OFTEN
Monthly
Monthly
If the machine has been turned off for a
long time
•
It is recommended that carbon filters be replaced every 6 months.
•
If the new filter cartridge cannot be inserted, insert the old one
and turn until it stops, remove it and then retry the new cartridge.
6. Top surface of cartridge will become flush with the bottom of the
filter head when fully engaged.
7. Turn the cartridge clockwise until it stops (1/4 turn).
8. Align the in/out arrow on the head and bracket assembly to the
in/out arrow on the cartridge.
9. Open tap to expel trapped air.
10. Run water for 4 minutes before usage.
•
Cleaners with acids, abrasives, alkaline or organic solvents will result in
deterioration of the plastic components and void the warranty.
•
If the water discoloration remains after purging unit, discontinue use
and contact an authorized InSinkErator service agent.
Advertisement
Table of Contents
