Lfe Level; Dolby D. Set (Dolby Digital Set); 11. Dts Set; 12. 6.1/Es Auto - Yamaha DSP-AX2 Owner's Manual

SET MENU Items

10. DOLBY D. SET (Dolby Digital Set)

10A LFE LEVEL
≥ SPEAKER..................0dB
HEADPHONE............0dB
10B D-RANGE
≥ SP:>MAX STD MIN
HP:>MAX STD MIN

11. DTS SET

11 LFE LEVEL

≥ SPEAKER..................0dB
HEADPHONE............0dB

12. 6.1/ES AUTO

12 6.1/ES AUTO
>ON OFF
38
10A. LFE LEVEL
Use this feature to adjust the output level of the LFE (low frequency effect)
10A LFE LEVEL
channel when playing back Dolby Digital encoded software. This setting is
SP..................0dB
effective only when this unit decodes Dolby Digital signals. The LFE signal carries
the low frequency special effect sound which is only added to certain scenes.
10B. D-RANGE (Dynamic Range)
Use this feature to adjust the dynamic range. This setting is effective only when
10B D-RANGE
this unit decodes Dolby Digital signals.
SP:"MAX STD MIN
11. LFE LEVEL
Use this feature to adjust the output level of the LFE (low frequency effect)
11 LFE LEVEL
channel when playing back DTS encoded software. This setting is effective only
SP..................0dB
when this unit decodes DTS signals. The LFE signal carries the low frequency
special effect sound which is only added to certain scenes.
Use this feature to switch the DOLBY Digital Matrix 6.1 and DTS ES AUTO mode
on or off.
12 6.1/ES AUTO
"ON OFF
You can adjust the levels from 0 dB to –20 dB.
• Adjust the LFE levels according to the capacity of your subwoofer or
headphones.
Select the "MAX" setting for feature films.
Select the "STD" (Standard) setting for general use.
Select the "MIN" setting for listening to sources at extremely low volume
levels.
You can adjust the levels from –10 dB to +10 dB.
• Adjust the LFE level according to the capacity of your subwoofer or
headphones.
Select "ON" to allow the main unit to automatically turn on the Dolby Digital
Matrix 6.1 or DTS ES decoder when the software with identification signal is
detected.
Select "OFF" if you want to control the mode manually by pressing 6.1/ES
on the remote.