Set Menu Items - Yamaha DSP-AX2 Owner's Manual

The SET MENU consists of sixteen items including the Speaker Set, Center Graphic Equalizer and Parameter Initialization features.
Choose the appropriate item and adjust or select the values as necessary.
Notes:
• You can adjust the items in the SET MENU while reproducing a source.
• We recommend that you adjust the items in the SET MENU while using a video monitor. It is easier to see the video monitor screen than it is to see
the front panel display on this unit while adjusting SET MENU items.
Items
1. SPEAKER SET
Selects the output mode suitable for your Center speaker.
1A. CENTER SP
1B. MAIN SP Selects the output mode suitable for your Main speakers.
1C. REAR L/R SP Selects the output mode suitable for your Rear speakers.
1D. REAR CT SP Selects the output mode suitable for your Rear Center speaker.
1E. LFE/BASS OUT Selects the output mode for LFE/BASS signal output.
1F. FRNT EFCT SP Selects the output mode suitable for your Front Effect speakers.
1G. MAIN LEVEL Selects the output level for your Main channels.
2. LOW FREQ. TEST Matches the Subwoofer level with the level of the other speakers.
3. L/R BALANCE Adjusts the sound balance for Left and Right channels.
4. HP TONE CTRL Adjusts the tonal balance of the headphones.
5. CENTER GEQ Matches the Center speaker tonal quality with the Main speakers.
6. INPUT RENAME Changes the name of the inputs.
7. I/O ASSIGN Assigns the I/O terminals to the designated input sources.
8. INPUT MODE Selects the initial input mode of the sources.
9. PARAMETER INI Initializes the parameters of a group of DSP programs.
10. DOLBY D. SET
10A. LFE LEVEL Adjusts the output level of the LFE channel for Dolby Digital signals.
10B. D-RANGE Adjusts the dynamic range for Dolby Digital signals.
11. DTS SET Adjusts the output level of the LFE channel for DTS signals.
12. 6.1/ES AUTO Selects the AUTO mode of Dolby Digital Matrix 6.1 and DTS ES
decoding.
13. SP DELAY TIME Adjusts the delay time for Center and Rear Center speakers.
14. DISPLAY SET Selects the display settings.
15. MEMORY GUARD Locks DSP program parameters and other SET MENU settings.

SET MENU Items

Descriptions Setting
LRG / SML / NONE
LARGE / SMALL
LRG / SML / NONE
LRG / SML / NONE
SWFR / MAIN / BOTH
YES / NONE
Normal / –10dB
TEST TONE;
OFF / ON
OUTPUT;
MAIN L/R, MAIN L, CENTER, MAIN R, R
SUR, REAR CT, L SUR, SWFR, FRONT
FREQ.;
35Hz—250Hz
(Wide or narrow band)
L to 0 to R
BASS; –6dB to +3dB
TRBL; –6dB to +3dB
5-band; –6dB to +6dB
Up to eight characters.
Digital I/O, CMPNT input.
AUTO / LAST
1 to 12
SP, HP; –20dB to 0dB
SP, HP; MAX / STD / MIN
SP, HP; –10dB to +10dB
ON / OFF
CENTER; 0ms to 5ms
REAR CNTR; 0ms to 30ms
BLUE BACK; AUTO/OFF
OSD SHIFT; 0 to 10
DIMMER; –4 to 0
OFF / ON
Page
33–35
35
36
36
36
36
37
37
37
38
38
38
39
39
39
31