Adjusting The Levels Of The Effect Speakers; Setting The Sleep Timer - Yamaha DSP-AX2 Owner's Manual

Adjusting the Levels of the Effect Speakers

You can adjust the volume level of each effect speaker (Center, Right Rear, Rear Center, Left Rear, Front Effect, and Subwoofer) while
listening to a music source.
Center
EFFECT LEVEL
CENTER
Right Rear
EFFECT LEVEL
R SUR.
Rear Center
EFFECT LEVEL
REAR CT
Left Rear
EFFECT LEVEL
L SUR.
Front
EFFECT LEVEL
FRONT
Subwoofer
EFFECT LEVEL
SWFR
Use this feature to automatically turn off the main unit after the amount of time you set. The Sleep Timer is useful when you plan to fall
asleep while the main unit is reproducing or recording a source. The Sleep Timer also automatically turns off external components connected
to AC OUTLETS. The Sleep Timer can only be set using the remote control.
1 Set PARAMETER/SET MENU to PARAMETER.
1
2 Press LEVEL to select the speaker(s) you want to adjust.
2
Each time you press this button the selected speaker changes and appears in
the front panel display only as follows: Center, Right Rear, Rear Center, Left
Rear, Front Effect speakers, and Subwoofer
3 Adjust the speaker volume level using the + or – on the remote control.
3
You can adjust the Center, Right Rear, Rear Center, Left Rear, Front Effect
0dB
speakers from +10 dB to –10 dB.
You can adjust the Subwoofer from 0 dB down to –20 dB.
0dB
0dB
0dB
0dB
0dB

Setting the Sleep Timer

To set the sleep timer
1 Select a source using the INPUT selector and start playback (or select a
1
broadcast station) on the source component.
2 Press SLEEP repeatedly to set the amount of time before the main unit
2
automatically turns off.
Each time you press SLEEP, the front panel display changes as shown below.
After a few seconds the display returns to the previous indication.
To cancel the sleep timer
1 Press SLEEP repeatedly until "SLEEP OFF" appears in the front panel
1
display.
After a few seconds, the display returns to the previous indication.
Notes:
• You cannot adjust the left and right speakers independently.
• When you adjust the speaker level using LEVEL, the settings you made using the
Dolby Surround Test and DSP Test change.
• When PARAMETER/SET MENU is set to SET MENU, you cannot adjust the
speaker level using LEVEL. However, each time you press LEVEL the current
level setting of each speaker appears. Select the speaker level you want to check
using h or g.
• When the headphones are connected to this unit, the levels of the effect speakers
cannot be adjusted.
SLEEP 120 min
SLEEP OFF SLEEP 30 min
Note:
• The Sleep Timer setting can also be canceled by turning off the main unit using
STANDBY on the remote control (or STANDBY/ON on the front panel) or by
disconnecting the AC Power Cord from the AC outlet.
SLEEP 90 min
SLEEP 60 min
51