Bat-caddy X4 Series User Manual page 6

ASSEMBLY INSTRUCTIONS (Continued)
6. Place the battery pack on the battery
tray. Insert the 3-prong battery plug
into the caddy outlet so the notch
aligns properly and attach T-connector
onto the battery.
(SLA Battery lead is attached to battery)
Then attach Velcro strap. Tightly fasten the Velcro strap
underneath the battery tray and around the battery. It is
recommended that you DO NOT fasten the screw on the plug
to the outlet, so in case of tip-over, the cable can unplug from
the socket.
Note: BEFORE CONNECTING make sure that caddy power is OFF, the Rheostat
Speed Control is in OFF position and the remote control is stored securely!
7. For X4R and X4 Pro insert anti-tip wheel into holding bar on
motor housing and secure with pin.
8. Attach optional accessories, such as Scorecard/Beverage/Umbrella holder, below the
handle. Instructions provided separately.
X4R Only
8. Unpack remote control and install batteries with plus and minus
poles as indicated in the diagram in the battery compartment of
the unit.
6
Pin