User Options; Reset Average Economy - Bully Dog GT GAS Manual

ABOUT THE GT GAS
Additional Gauge Options
The following gauge options are provided to allow the GT Gas to monitor additional sensors that are only available with
the Bully Dog Sensor Docking Station.
A/F Ratio 1 & 2
This gauge option shows the ratio of air to fuel. The GT
Gas will use this information to ensure that your engine
is using the correct ratio to completely burn all of the fuel
being used and maximize performance and efficiency.
Only available on Bully Dog Sensor Docking Station part
number 40385.
AUX 1, 2 & 3
This gauge option shows the information from sensors
connected to the 0-5V auxiliary inputs on the Bully Dog
Sensor Docking Station.
User Options – Setting & Resetting
These options allow the user to customize their GT Gas to their
own liking increasing the usability.
Set Color Theme
Change the display colors on your GT Gas.
Adjust Back-light
Change the brightness for both the day and the night operating
modes of the GT Gas.
To change between night and day mode, hold both the right
buttons (the up and down buttons) while you are in the general
gauge display.
Set Animation Preferences
Turn the Wave Effect on or off. This effect creates a ripple on the screen whenever you press a button.
English/Metric Units
Switch between miles/kilometers and gallons/liters.
Reset to Default
Change the user preferences back to the original Bully Dog default settings. This option does not change other GT Gas
features to default settings.
Resetting Average Economy
This option resets the saved values on the GT Gas for average fuel economy, the number of gallons used, and the fuel
efficiency grade displayed by the Driving Coach.
GT GAS Part# 40417
9
AUX Temp
This gauge option shows the information returned to
the Sensor Docking Station by an optional temperature
sensor. The port for this sensor is marked as 5V out.
Frequency
This gauge option shows the information from a pulsing
type of sensor, like an on-board speed sensor or another
optional sensor that operates on the 0-5kHz 5V pulse
range. The port on the Bully Dog Sensor Docking Station
for this gauge option is marked as FN.
Go Back
to Main Menu
Color Theme Setup
Backlight Setup
Animation Setup
US/Metric Units
Reset to Default

USER OPTIONS