EVBox BusinessLine Manual
Hide thumbs Also See for BusinessLine:

Advertisement

EN
BusinessLine
manual
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BusinessLine and is the answer not in the manual?

Questions and answers

Summary of Contents for EVBox BusinessLine

  • Page 1 BusinessLine manual...
  • Page 2 Meet BusinessLine! Let’s get started.
  • Page 3 BusinessLine manual...
  • Page 4: Table Of Contents

    Warnings Cautions Remarks Transport and storage Product description Meet BusinessLine Components & features Networking your station BusinessLine Smart Charging features Operation Charging with a QR code Charging with an RFID card LED ring chart Warranty Inside the box Installation Safety requirements...
  • Page 5: General

    General Errors or Inaccuracies For any inaccuracies or omissions, or to provide feedback and suggestions, send an email to help@evbox.us. Communication Regulations (FCC) This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 6: Safety Regulations

    • personnel. • This product contains no user serviceable parts. Consult EVBox or your distributor for more information. Please do not attempt to service or repair the charging station yourself • Incompetent installation or repairs may result in danger to the user and could result in warranty void.
  • Page 7: Remarks

    • Always pull on the plug’s hand grip and never on the charging cable itself. • Always store the EV plug in its designated EVBox dock. • Remarks • This charging station has been designed and tested in accordance with international standards.
  • Page 8: Product Description

    Product description Meet BusinessLine The EVBox BusinessLine is a commercial-grade charging station capable of charging all J1772 mode 3 compatible (plug-in) electric vehicles. All BusinessLine charging stations are equipped with a number of Smart Charging features, experience. The EVBox BusinessLine is made with safety and user-experience as our top priorities.
  • Page 9: Components & Features

    LED Ring The iconic LED ring. BusinessLine’s smart status indicator makes clear what the BusinessLine is doing at all times. Charging cable BusinessLine charging plug J1772 is compatible with electric vehicles that can handle capacities from 3.7kW...
  • Page 10: Networking Your Station

    Smart Charging allows you to maximize your charging infrastructure and get the most out of your investment. This has been key to our continued success and is a true differentiator in the world of Electric Vehicle Service Equipment (EVSE). Below are BusinessLine’s three primary Smart Charging features: which connects a group of charging stations per location to each other through a single charging stations while only paying for one subscription plan.
  • Page 11: Operation

    Operation • A charging session may be started using a RFID card or a QR code (depending on network operator support). • The charging station is equipped with a self-testing internal residual current leakage detection device that will stop the charging process if current leakage (AC or DC) is detected.
  • Page 12: Led Ring Chart

    However, any such problems encountered out of any causes that are not attributable to EVBox shall be at the customer’s risk and account (for more detail check the warranty section, see page 36).
  • Page 13 Technical Technical Features Charging capacity per connector 7.4 kW Connector type SAE J1772 Number of connectors 1 or 2 UL, CE, CUL Power output 1-phase or 2-phase, 208V-240V, 32A Temperature range (F) -22°F to +130°F °F) Temperature range (C) -30°C to +55°C ( °C) Humidity (non-regulating) Max.
  • Page 14: Inside The Box

    Inside the box EVBox BusinessLine unit Single or Double connector Allen key to open the cover of the unit Installation manual...
  • Page 15: Installation

    Planning the installation Minimum requirements • Each unit MUST be connected with its own dedicated power line, for a BusinessLine Double you need to run 2 power feeds. • Calculate the existing electrical load to determine the maximum operating current.
  • Page 16: Pre-Installation Checklist

    The charging station can either be installed against a sturdy wall or on the optional stainless steel pole. To accommodate wall mounting, a wall mount bracket is available as an option. Consult EVBox or your distributor for more details. Pre-installation checklist •...
  • Page 17: Installation Steps

    Use a conduit to run the power line to the charging station. The power line enters the station via the backplate in the case of a single station and through the pole for double stations. Note: BusinessLine Double stations need two separate power cables with separate circuit breakers.
  • Page 18 2.5 ft so as to comfortably reach the terminal block. Step 2: Installing the mounting options 2a. Mounting the CombiPole • EVBox charging stations can be mounted onto a pole. To do this, EVBox offers two types of Combipole - Inground (PN# 290150) - Surface mounted (PN# 290305) •...
  • Page 19 A wall mount cable wrap is also provided for cable management. Mounting a BusinessLine Double • A wall mount bracket is used to mount a BusinessLine Double onto a wall. • wall should be able to take up to 100lb weight). •...
  • Page 20 2c. Mounting on a retractor cable management system • EVBox BusinessLine Single units can also be mounted onto a taller post which provide supperior cable management. The system doesn’t let the charge cable touch the ground, making the install safer as well as increasing the lifespan of the charge cable (PN# 290152).
  • Page 21 Mounting the retractor post • The retractor post is mounted on a concrete surface using the four (4) holes on its base plate. • We recommend you to use deep anchor bolts for a secure installation. Attaching the cable to the retractor •...
  • Page 22 To see how to mount your station to the retractor system, skip ahead to page 24. Step 3: Mounting the BusinessLine 3a. Pole mounting Pole mounting for BusinessLine Single Mount the adapter kit as shown on page 18. • Mount the screws as shown •...
  • Page 23 Hang the unit onto the screws and pull the unit down • Tighten the screws Wall mouting for BusinessLine Double • For wall mounting a BusinessLine Double, please refer to the steps for pole mounting a BusinessLine Double on page 18.
  • Page 24 3c. Retractor pole mounting • Mount the screws as shown onto the retractor poles (two M5 and one M6 bolts provided) • Allign the holes on the back plate of the unit with the screws on wall bracket • Hang the unit onto the screws and pull the unit down •...
  • Page 25 4. Pull the cable from the top of the unit. The power cable needs to be attached to the ternminal block located on the top of the unit. 5. Connect the power supply cable(s) to the power line terminal block labeled L1, GND (ground) and L2.
  • Page 26 Wiring with a wall bracket (BusinessLine Double) 1. Slide the BusinessLine Double on to the wall bracket, making sure the power cable(s) reach the top of the unit where the terminal block is located.
  • Page 28 4c. Wiring with a retractor pole 1. Insert the power cable through the hole in the back plate. 2. Snake the power cable upwards into the tunnel above the hole. 3. Continue snaking the power cable from behind the components using the tunnel. 4.
  • Page 29 Tips and tricks for easy install steps to remove the charge cable. • Unscrew the blue and the brown cables form the contactor labelled T1 and T2. • Unplug the yellow ground wire from the spring clamp. • Unplug the thin red wire (pilot signal). •...
  • Page 30 Step 6: Testing and completion 1. Check all plug connections on the controller and communication pressing all connectors into position and ensuring they’re all in the correct spot (matching color and size). 2. Power up the unit, The charging station will now carry out an automatic test. The LED ring around the socket shows the following color indications during the test (max.
  • Page 31: Post-Installation Checklist

    • The EV plug management bracket is available with options for pole mounting of dual EV plug, single EV plug and wall mounting of a single EV plug. Contact your local EVBox representative for details.
  • Page 32: Installing The Communication Module Externally

    nstalling the communication module externally A GSM / UMTS link with the charging station is essential for the connected station to function. However, a good GSM/UMTS link cannot always be obtained in enclosed spaces (i.e., a closed or underground parking garage). In cases like this, the communication module should be positioned outside the charging station along with the GSM/UMTS/GPS antenna and connected to the charging station.
  • Page 33: Adding A Satellite Station To A Hub

    (located in the Hub) controls more than 6 connectors. This method of installation is not possible. For correct functioning of the EVBox (smart) grid, it is essential that you contact your network operator to adjust the power settings available on the grid.
  • Page 34 Part number Description 470040 Connector set for Hub/Satellite connection 470041 Set terminator Hub/Satellite connection...
  • Page 35: Troubleshooting

    Troubleshooting Problem Possible cause Solution / Recommendation Charging station No power to charging station • Check that the residual current device does not react and circuit breaker in the meter cabinet are on) • Check that the supply cable entering the charging station is live •...
  • Page 36: Warranty

    EVBox shall be for Customer’s risk and account. Contact help@evbox.us to report any defect or malfunction to your charging station(s). 2. At its sole discretion, EVBox will repair or replace any Errors and/or defective Equipment during the warranty period. EVBox may conduct warranty services at any location, at its sole discretion, and EVBox may apply temporary patches, solutions, and or restrictions relating to the Equipment as part of the warranty services.
  • Page 37: Declaration Of Conformity

    Declaration of conformity...
  • Page 38 EVBM_022018 © EV-Box North America, Inc. EVBox strives to produce products of the highest quality. EVBox products for the US market are UL 2594 tested and compliant. For the Canadian market, they are CSA C22.2 No. 280-16 tested and compliant.
  • Page 39 You’re all set! Let’s charge.
  • Page 40 Article number: MAN15-USAV2 EVBM_022018 © EV-Box North America, Inc.

Table of Contents

Save PDF