Table of Contents
Advertisement
Assembly instructions (continued)
STEP 14: Attach Hose Ring
Attach the Hose Ring to the Right Front Leg and fasten firmly using the pre-assembled Screw.
CAUTION: Always secure the hose to the leg to keep the regulator & hose away from hot
surfaces and accidental dripping hot grease. Failure to follow this step may cause a fire or
explosion.
STEP 15: Attach Hose Ring
WHAT YOU NEED:
One x Cylinder Hook (O)
Loosen the pre-assembled screws from Cylinder
Support Beam (Q) and tighten One Cylinder Hook
(O) to the Cylinder Support Beam (Q).
Page 14
Hose Ring
Hose
M
Q
O
Advertisement
Table of Contents
