Ranger G4RANQ Instructions For Assembly And Use page 11

Assembly instructions (continued)
STEP 7: Attach Firebox
WHAT YOU NEED:
Four x M6*16mm screws (AA)
One x Firebox & Hood Assembly (A)
This requires two people to lift and place the
Firebox & Hood Assembly (A) onto the cart and
firmly fasten with Four M6*16mm screws (AA)
as shown.
STEP 8: Attach Grease Channelling Tray and Grease Cup
WHAT YOU NEED:
One x Grease Channeling Tray (U)
One x Grease Cup (V)
Insert the Grease Channeling Tray (U) and Grease
Cup (V) into the cart as shown.
STEP 9: Attach Hood Handle and Temperature Gauge
WHAT YOU NEED:
One x Hood Handle (C)
One x Temperature Gauge Assembly (B)
Attach Hood Handle (C) together with the
pre-assembled Hood Handle Bezels onto Hood
Assembly as shown and fasten the screws.
Attach Temperature Gauge Assembly (B) onto
Hood Assembly and fasten the screws as shown.
Page 11
A
A
AA
AA
N
U
V
B
C