Step 10: Attach Left Side Shelf - Ranger G4RANQ Instructions For Assembly And Use

Assembly instructions (continued)

STEP 10: Attach Left Side Shelf

WHAT YOU NEED:
Six x M6*16mm screws (AA)
One x Left Side Shelf (E)
One x M6 Washer (CC)
Attach Two M6*16mm screws (AA) into the upper two holes on Left Side Shelf (E). Leave the screw
heads protruding approximately 5mm.
Hang Left Side Shelf (E) onto the screws, attach another Three M6*16mm screws (AA) into the lower
three holes and tighten all Five M6*16mm screws (AA) to the bbq left side.
Attach One M6*16mm screw (AA) and One M6 Washer (CC) into the hole on the Left Side Shelf (E)
and tighten.
2PCS AA
STEP 11: Attach Right Side Shelf
WHAT YOU NEED:
Six x M6*16mm screws (AA)
One x Right Side Shelf (G)
One
x M6 Washer (CC)
Repeat as in Step 10 to attach the Right Side Shelf (G). Check and tighten all screws.
Page 12
2PCS AA
G
1PC CC
1PC AA
3PCS AA
1PC AA
3PCS AA
1PC CC