Reely ROAD T-MAX Operating Instructions Manual page 36

The following functions are available:
1. Maximum brake force: Here you can determine the brake force to be applied when braking. In general, "100%"
should be selected.
~
~
2. Engine braking: This function simulates the braking characteristics of a "normal" electric engine when the throttle
is released (neutral position on remote control).
~
~
3. Selecting the rechargeable battery type: Select between NiMH and LiPo rechargeable batteries.
Make sure you select "LiPo". Otherwise the LiPo battery pack can be totally discharged (with NiMH
batteries undervoltage is recognised from 4.5 V downwards) and thus destroyed.
Due to the high power requirement, the vehicle should only be operated with full-load LiPo rechargeable
battery packs.
~
~
4. Switching reverse drive on/off: If needed, reverse drive can be activated.
~
~
Once the speed controller has been through all the functions, it begins at the first function again. You
can continue programming.
To exit programming mode, simply switch off the speed controller ("OFF" position).
36
60% brake force
100% brake force
Switched off, 0% brake force
Switched on, 10% brake force
NiMH
LiPo
reverse drive off
reverse drive on