Table of Contents
Advertisement
General Information
1
General Description
1-2
The MVME761EXT Transition Module provides the interface
between the standard Ethernet, SCSI and PMC I/O connectors, and
the following MVME260x, MVME360x, or MVME460x VME
modules:
MVME2603-xxxx
MVME2604-xxxx
MVME3604-xxxx
MVME4604-xxxx
The MVME761EXT is an I/O transition module designed for
Motorola's VME Processor Module, and Single Board Computer
(SBC) families of VME processor modules, generically referred to in
this manual as MVMExxxx.
The MVME761EXT is used as an interface between the processor
module and its peripheral devices. The purpose of this module is to
provide rear, industry-standard connectors that simplify external
customer cable requirements.
The P2 adapter assembly routes the I/O signals and grounds from
the P2 connector on the chassis backplane at the VMEmodule MPU
connection to the MVME761EXT.
Cables are supplied for interconnection between MVME761EXT
and the P2 adapters.
The MVME761EXT front panel has a SCSI port, PMCIO and two
Ethernet ports (10Mbps and 10/100 BaseT).
Figure 1-1
shows the MVME761EXT transition module component
layout and the front panel. See
port connectors.
Table 1-1
for a list of the front panel
Computer Group Literature Center Web Site
Advertisement
Table of Contents
