Yamaha MU80 Owner's Manual page 78

PERFORMANCE MODE
3 Use the SELECT w buttons to select the Program Number pa-
rameter, then use the VALUE q buttons to select the desired
Performance number.
4 From the All Part display, press the PART q buttons simulta-
neously, so that the Single Part display is shown.
5 Select the desired Part by using the PART q buttons.
6 Select the desired Voice bank for the Part by using the SELECT
w buttons to select the Bank parameter, and using the VALUE
q buttons to change the bank number.
7 Select the desired Voice for the Part by using the SELECT w
buttons to select the Program Number parameter, and using the
VALUE q buttons to change the Voice number.
T o r e t u r n t o t h e A l l P a r t d i s p l a y f r o m t h e S i n g l e P a r t d i s p l a y , e i t h e r
press the PART q buttons simultaneously, or press the EXIT
button.
6 8
Performance number
I n d i c a t e s c u r r e n t l y s e l e c t e d P a r t .