Part Controls - Yamaha MU80 Owner's Manual

MULTI MODE
Parts 17 ... 32 can be displayed by selecting one of those Parts with the
PART q buttons. For example, when Part 18 is selected, the changes
as shown below:
Shows half "level meter" indication for the A1 and A2 A/D Parts and all 32
Parts. Currently selected parameter (here, Voice number and name) is dis-
played at top.
Shows full "level meter" indication for the A1 and A2 A/D Parts and all 32
Parts. Currently selected parameter is not displayed.

Part Controls

The Part controls in the Play mode give you tools for adjusting the basic
sound and settings for each Part. The MU80 lets you adjust the various set-
tings for each Part individually (Single Part control) or together (All Part
control). Each of these types is explained in greater detail below.
NOTE
In the Multi mode, no settings can be permanently saved to the internal memory of the
MU80. However, you can use the Dump Out function to save Multi settings to a MIDI data
storage device. (See page 102.)
3 6