Ibm Pc And Clones - Yamaha MU80 Owner's Manual

Operation
1 Set the HOST SELECT switch to Mac.
2 Connect the MU80 to the host computer, as shown in the illus-
tration above. Use a standard Macintosh cable (8-pin Mini DIN
on both ends; see page 32).
3 Turn on the the host computer, then the MU80.
4 Start up your music software, and set up the appropriate options
on the software for operation with the MU80.
The options you may have to set include:
MIDI Interface Type g
MIDI Time Piece
Clock
Other options and settings may have to be made as well. Refer to the own-
er's manual of your particular music software for more information.

IBM PC and Clones

Follow these instructions if you have an IBM PC/AT or compatible computer
not equipped with an external MIDI interface. Connect the TO HOST termi-
nal on the MU80 to one of the computer's serial ports, COM 1 or COM 2.
IBM PC/AT or Compatible Computer
NOTE
Your music software must be able to recognize the TO HOST connection. Consult your
Yamaha dealer for more details. If your software is not compatible, you can still use the
MU80 by installing a MIDI interface (internal card or external) to the computer.
g Standard MIDI Interface
g
g g
On (for controlling all 32 Parts of the MU80)
g g
g
g g
g g 1 MHz
g
g g
Serial Port
GUIDED TOUR
2 7