Setting Part Assign From An External Midi Device; Selecting Voices Of An Xg Plug-In Board - Yamaha MU128 Owner's Manual

About Plug-in System

Setting Part Assign from an External MIDI Device

The Part Assign parameter can also be set from an external MIDI de-
vice by using the system exclusive message given below.
F0 43 1n 4C 70 PBtype Serial# Part# F7 (hexadecimal)
n:
PBtype: Indicates the type of XG Plug-in board. For example, the
Serial#: This number distinguishes individual boards when more than
Part#:
Example: When assigning the first PLG100-DX board to Part 3, the

Selecting Voices of an XG Plug-in board

Once an installed XG Plug-in board has been properly assigned to a
Part with Part Assign and the assigned Part has been selected, the board
can be selected by using the [SELECT</>] buttons. (The appro-
priate LED PLG-1 - PLG-3 flashes.) The selected board is also indi-
cated in the display by its corresponding icon.
Once the board is selected in this way, you can select and play its
Voices in the normal way.
NOTES
• Unlike the Voices of the MU128 itself, XG Plug-in board Voices are not as-
• When selecting XG Plug-in board Voices by using the Voice Category buttons,
Details
XG Plug-in board Voices can be also selected from an external MIDI device by
specifying the appropriate bank select MSB (control change #0), bank select
LSB (control change #32) and program change messages.
178
Device number (of the MU128)
PLG100-DX is "2."
one of the same type XG Plug-in board are installed. For one
board, this is set to "0"; when two of the same type boards are
installed, use "0" and "1."
Part Assign number for the XG Plug-in board.
Range: 00 (Part 1) - 0F (Part 16)
7F turns Part Assign off
message should be:
F0 43 10 4C 70 02 00 02 F7 (hexadecimal)
signed to all the available program numbers, and many of the program num-
bers are "empty" with no assigned Voices. When such a program number is
selected, "Silence" is shown in the display and the Part does not sound.
certain categories may not be available (depending on the board), and the
category name may not match with the type of Voice actually selected. The
original Voices of the board which are not included in the XG format are
assigned to the Model excl. button.
MU128 Plug-in System