Yamaha MU128 Owner's Manual page 75

4 Select Part 1 and select a new Voice for it: "HeavySyn" (082).
5 Select Part 2 and select the "HeavySyn" Voice for it as well.
6 Select the "OTHERS" parameters.
Press the [EDIT] button. From the first Edit menu, select and call
up "PART," then select and call up "OTHERS."
First Edit menu.
Second Edit menu.
7 Select and set the Detune parameter for Part 2.
Use the [SELECT <] buttons to select the parameter, then the
[VALUE -/+] buttons or data dial. With Part 2 selected, in-
crease this to "+2.2."
8 Set the Detune parameter for Part 1.
Keep the display at the Detune parameter and select Part 1. De-
crease this setting to "–2.2."
This produces a "fat" layered sound. You can check how much
this changes the sound by exiting to the Single Part display and
using [MUTE/SOLO] button to listen to the Parts by themselves
and together.
Now, try changing some other parameters.
9 Exit to the second Edit menu and call up the "VIBRATO" param-
eters.
Press the [EXIT] button once, then select and call up the "VI-
BRATO" parameters.
MU 128 Guided Tour
Editing in the Performance Mode
75