Setting The Part Assign Parameter - Yamaha MU128 Owner's Manual

Yamaha tone generator owner's manual
Hide thumbs Also See for MU128:
Table of Contents

Advertisement

time before turning off the power, since data may be deleted if you
turn off the power before the backup operation is completed.
• When editing any "hidden" parameters on the board (parameters that
can only be accessed via MIDI) from an external MIDI device, these
parameters will be initialized to their default values once you turn
off the power. (The backup function does not apply to these "hid-
den" parameters.)
Performance Mode:
• XG Plug-in boards can be also used in the Performance mode. How-
ever, the parameters of the Plug-in board which can be stored as the
performance data are limited to those which can be set from the panel.
• By sending appropriate parameter change messages corresponding
to each Plug-in board, the settings of the Plug-in board(s) can be
changed from an external MIDI device; however, the display of the
MU128 may not match with the actual settings made to the board(s).

Setting the Part Assign Parameter

Before you can use the Voices of a tone generator type XG Plug-in
board, you must first assign the board to a Part with the Part Assign
parameter.
Part Assign can be set independently for each XG Plug-in board (tone
generator type).
Operation
1 Call up the Utility mode by pressing the [UTIL] button.
2 Select "PLUGIN" (by using the [SELECT</>] buttons), then press
the [ENTER] button to call up the "PLUGIN SELECT" display.
NOTE
The "PLUGIN" menu is not available if no XG Plug-in board has been installed.
3 Select the desired XG Plug-in board (tone generator type only)
with the [SELECT</>] buttons, then press the [ENTER] button.
4 Select the "PartAssign" parameter with the [SELECT</>] buttons,
then set the desired Part number with the [VALUE-/+] buttons
or data dial.
5 Return to the original display by pressing the [EXIT] button several
times.
MU128 Plug-in System
About Plug-in System
177

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents