Single Part Controls - Yamaha MU128 Owner's Manual

Single Part Controls

You can make changes to each individual Part by using the Single Part con-
trols. These are displayed in the Multi Play mode, and give you at-a-glance
confirmation and control of the important basic settings of the selected Part.
If the Multi mode was active when you last turned the power off, the next
time you turn the power on, the Single Part controls are automatically called
up.
Let's take a look at the Play display again:
Each of these settings are made independently for each Part. For example,
each Part could have a different Volume setting, or a different Pan setting.
Try going through the brief sections below and making some changes in the
Part controls yourself.
PART BANK/PGM# VOL EXP PAN REV CHO VAR KEY
Part number. (Change this with the [PART -/+] buttons.)
MU128 Guided Tour
Editing in the Multi Mode
Voice name, bank number and program number.
Chorus Send.
Reverb Send.
Pan (stereo position).
Expression.
Volume.
Note Shift
(key transpose).
Variation Send.
59