Memory - HP ProLiant DL320 Generation 3 Maintenance And Service Manual

Table 5-3: Power Supply Specifications
Item
Rated input power
Rated input current
Output characteristics
Rated steady-state power
Maximum peak power
Ambient temperature range
Operating
Non-operating
Relative humidity (non-condensing)
Operating
Non-operating
Dielectric voltage withstand
Input to output
Input to ground
Maximum wet-bulb temperature

Memory

Table 5-4: SDRAM DIMM Specifications
Item
Size
Speed
Width
Type
Note: DIMMs must be industry-standard 184-pin PC3200 DDR DIMMs. The DDR DIMMs must
support CAS Latency 2, or greater. They must also contain the mandatory JEDEC SPD. Use HP
supplied DIMMs only.
HP ProLiant DL320 Generation 3 Server Maintenance and Service Guide
continued
Description
580 W
6 A (110 V) to 3 A (220 V)
350 W
422 W for 15 seconds.
10 °C to 48 °C (50 °F to 118 °F)
-40 °C to 70 °C (-40 °F to 158 °F)
5 % to 85 %
5 % to 95 %
1800 VAC/second
1800 VAC/second
41.3 °C
Description
64 MB and 4 GB
400 MHz
72 bits
PC3200 ECC unbuffered DDR SDRAM DIMMs
Specifications
5-3