Toshiba e-STUDIO330AC Hardware Troubleshooting Manual page 14

1.TROUBLESHOOTING FOR THE HARDWARE
Message
This original is copy protected
DEPARTMENT Quota exceeded.
Contact the Administrator.
Not enough Work Space to store
originals
Will you print out stored
originals?
USER Quota exceeded.
Contact the Administrator.
USER and DEPARTMENT Quota
exceeded.
Contact the Administrator.
The number of originals
exceeds the limits.
The scanned data will be
deleted.
The number of originals
exceeds the limits.
Will you copy stored originals?
Cannot print due to resource
shortage
HDD self test is processing
Exchange of the HDD is
required. Please contact
service.
Please make a backup of HDD
data.
Close large capacity feeder door The drawer of the Large
14 Messages Displayed on the Touch Panel
Problem Description
An attempt is made to copy a
prohibited original.
The copying, printing or
scanning quota to the
department has reached "0".
Internal memory available ran
out while scanning.
The copying, printing or
scanning quota to the user has
reached "0".
The copying, printing or
scanning quota to the user and
department has reached "0".
The number of originals to be
scanned has exceeded the limit
of 1000 sheets during scanning.
(The magazine sort or page
number function is used.)
The number of originals to be
scanned has exceeded the limit
of 1000 sheets during scanning.
Large amounts of jobs have
remained.
The status of the internal
storage device is being checked.
Due to the malfunction in the
internal storage device, its
replacement is required.
Although the internal storage
device is being worked
properly, periodical backup of
the data in the internal storage
device is recommended just in
case.
Capacity Feeder has been
opened or the setting of the
guide in the drawer does not
match the paper size.
Corrective Action
This original cannot be copied.
For details of setting the quota, ask your
administrator.
To print out the data for the originals stored
(scanned) until the message appeared, press
[Yes] on the touch panel. To delete the stored
data, press [No].
For details of setting the quota, ask your
administrator.
For details of setting the quota, ask your
administrator.
Reduce the number of originals to be
scanned, and try again.
To print out the data for the originals stored
(scanned) until the message appeared, press
[Yes] on the touch panel. To delete the stored
data, press [No].
Delete unnecessary jobs in progress or during
interrupting. Then reattempt the operation.
The response of both the control panel
operation and job execution may become
slower during the display of this message.
Contact your service representative.
Back up the data by means of [Data Backup/
Restore] in the Admin menu of the User
Functions menu.
For details, refer to the MFP Management
Guide.
Check that the drawer of the Large Capacity
Feeder has been closed firmly.
Set 4 guides in the drawer so that they match
the paper size.
For details on how to set up the guide, refer to
the Paper Preparation Guide.