1.TROUBLESHOOTING FOR THE HARDWARE
8
Set the paper size again and press [OK].
For details about how to set the paper size, refer to "Doing Paper Settings" in Chapter 1 of the Paper Preparation
Guide.
Press the [HOME] button to return to the basic menu. Then press [Copy] to enter the copy menu.
9
10
Confirm that the paper size is correctly detected if you selected [Auto] in step 8.
The detected paper size is indicated on the drawer button in the equipment status indication area on the left.
An incorrect paper size or "
P.8 "When This Screen Is Displayed"
Try copying or printing again.
11
" indicates an unsuccessful detection. In this case, see the following page.
Clearing a Paper Misfeed 29