Recording Songs Based On Measures And Beats (Metronome Mode Recording) - Yamaha PRO/Mark IV Advanced Operating Manual

Recording Songs Based on
Measures and Beats
(Metronome Mode
Recording)
There are two recording modes available for the
Disklavier: Time Mode (recording mode based on the
elapsed playing time) and Metronome Mode. Once you
record songs in Metronome Mode, you can start
overwriting recordings synchronized with the beats of the
internal metronome over the recorded songs.
Furthermore, you can change the tempo of the recorded
songs afterward by editing its original data.
Making a New Recording
1
Set up the metronome. (→ steps 1
and 3 of "Playing the Disklavier along
with the Internal Metronome" on
page 39)
2
Tap on .
3
Press .
4
Play the Disklavier along with the
metronome.
Recording starts automatically.
5
After playing the Disklavier, press
to stop recording.
Measure-number
counter starts.
Overwriting a Part on an Existing
Song
1
Select the song to be overwritten
(→ pg. 12 "Selecting a Song" in
"Quick Guide"), and then tap on
.
2
Tap on
3
Set up the overwritten part (track) and
its voice. (→ pg. 44 "Recording the
Left- and Right-Hand Parts Separately
(Overwrite Recording)", → pg. 47
"Recording Ensemble Parts")
4
Press .
5
Play the Disklavier along with the
metronome.
Recording starts automatically.
6
After playing the Disklavier, press
to stop recording.
7
Tap on (to overwrite) or
record as a new song) to complete the
recording.
To cancel recording, tap on
CHAPTER 4: Recording
.
(to
.
50