Table of Contents
Advertisement
Setting Up the Disklavier for
MIDI Data Transmission (MIDI
OUT)
The Disklavier can transmit the information of piano
playing/ensemble part playback on the Disklavier as the
MIDI data to the connected MIDI device to reproduce the
sound with its sound generator, etc. or to record the MIDI
data. The following options should be set up in advance.
[Port]
Selects the terminal/port used for the data transmission.
[MIDI]:
Select this when the MIDI device is
connected to MIDI OUT terminal.
[USB]:
Select this when the MIDI device is
connected to USB port on the front of the
I/O Center.
[Transmit]
Selects one of the following parts to be transmitted to the
connected MIDI device.
[ESBL Out]:Select this when you transmit the ensemble
part played back on the Disklavier.
[KBD Out]: Select this when you transmit the piano
part played on the Disklavier.
[P-Part ESBL Out]
Selects the channel(s) to which the piano part is assigned.
[ON]:
Select this when you assign the piano parts
to both the piano and the ensemble
channels at data transmission.
[OFF]:
Select this when you assign the piano parts
to only the piano channels at data
transmission.
CHAPTER 7: Enhancing the Disklavier Features by Hooking Up a MIDI Device
1
2
3
4
Tap on
in the [Main] screen,
and then on
.
Tap on
/
following screen appears.
Tap on [Port]/[Transmit]/[P-Part ESBL
Out], and then press
desired option.
Tap on
to complete the setup.
so that the
to select the
82
Advertisement
Table of Contents
