Recording With The Metronome - Yamaha TransAcoustic SHTA Owner's Manual

Chapter
4
Recording Your Performance

Recording with the Metronome

You can use the metronome to record performance.
1
Press the FUNC. button repeatedly to switch the
function to METRO.
The current tempo setting appears on the display.
2
Press the PLAY/PAUSE button to start the
metronome.
3
Press the +/YES or –/NO button to change the
tempo.
You can change the tempo in the range of 5 to 500 (bpm).
Note
You can recall the default tempo setting (120) by pressing the +/YES and
–/NO buttons simultaneously.
4
Hold the FUNC. button for a second to switch to
the beat setting display.
The current beat setting blinks on the display.
5
Press the +/YES or –/NO button to change the beat.
You can change the beat in the range of 2 to 15, or 0.
The first beat is accented with the bell sound and the rest with clicks.
When the beat is set to 0, clicks sound on all beat.
Note
You can recall the default beat setting (0) by pressing the +/YES and –/NO
buttons simultaneously.
6
Press the FUNC. button to return to the tempo
setting display.
7
Start recording.
See "Recording Your Performance on the Internal Memory" on page
26 or "Recording Your Performance on the USB Storage Device"
on page 28.
Note
• The metronome also stops when recording stops.
• The metronome sound is not recorded.
30
Hold