Table of Contents
Advertisement
5
Apply the desired reverb effect.
(→ pg. 42)
6
Tap on
in the [Main] screen.
[Vocal Harmony]
screen
7
Tap on the desired vocal harmony
type.
For the entire list, see "Vocal Harmony Type List".
(→ pg. 78)
8
Tap on
.
The [Balance] setting screen appears.
9
Tap on [Balance], and then press
to adjust the balance between your
voice and the effect.
Tip:
The balance can be adjusted from 0 to
100%.
10
Tap on
Vocal Harmony mode.
Each time you tap on
mode is activated (the color turns to blue) or
inactivated.
Vocal harmony type
to activate
, the
11
Tap on
to clear the [Vocal
Harmony] screen.
Tip:
The shortcut button on the [Song] screen
is also available. Tap on
mode above, and on
Each time you tap on this button,
switches.
Note:
The following features are not
available while Vocal Harmony Mode is
activated.
• Video synchronized playback
• Video synchronized recording
Note:
Vocal Harmony Mode does not
function while playing back songs in
SmartPianoSoft, PianoSoftPlusAudio, and
audio CDs or receiving analog MIDI data.
CHAPTER 6: Other Settings
to activate the
to inactivate it.
and
60
Advertisement
Table of Contents
