Yamaha PRO/Mark IV Advanced Operating Manual page 23

Monitor Speakers*
* Only for models supplied with the Monitor speakers.
— Front —
A Woofer unit
B LOW/HIGH volume controls
Adjust the base/treble sound volume.
C Power indicator
Lights up while the speaker is turned on.
— Rear —
F POWER switch
Turns the monitor speaker on/off.
G AC power cable
1 2
LOW HIGH LINE
D LINE1/2 volume controls
Adjust the sound volume for each line input.
Note:
For normal use, turn down the LINE1
volume completely, and turn up the LINE2 volume at
the three o'clock position.
E Tweeter unit
POWER
INPUT
ON
LINE 1
( 10dB)
OFF
LINE 2
(+4dB)
PARALLEL
H INPUT LINE2 (XLR connector/phone jack)
Accepts the line output from the I/O Center or
external AV equipment.
I INPUT LINE1 (RCA jack)
Accepts the line output from external AV equipment.
CHAPTER 1: Getting Started
Note:
The location of
each unit differs
depending on the model.
10