Advertisement
ASSEMBLY INSTRUCTIONS CONTINUED
REFECTORY EXTENDING TABLE
INSTRUCTIONS
1) ATTACH LEGS TO THE CROSS BEAM
a) Place the leg frames and cross beam upside down onto a
clean, soft surface such as blanket or carpet on the floor.
Place them into position relative to one another, following the
number markings.
b) Insert metal dowels into the holes on the side of the leg
frames by screwing them in a clockwise direction until tight.
Insert the Universal Connectors into the rebates in the cross
beam.
c) Push the parts together while guiding the metal dowels into
the Universal Connectors. Tighten with an Allen key.
0
2
M
A
T
T
H
E
W
H
I
L
T
O
N
Advertisement
