Using The Built-In Tuner - Yamaha GW50 Owner's Manual

USING THE BUILT-IN TUNER

The GW50 has a convenient built-in tuner that lets you tune
your guitar without having to disconnect it.
1.
Simultaneously hold down [SHIFT] and press
[TUNER] (or simultaneously press and hold
don Pedal Switches 1 and 2 until the Tuner
mode display " PITCH
2.
Now, making sure that other strings do not
sound, play the bottom E string on your
guitar. Let the string ring out, so that the
tuner receives a fairly constant pitch.
The number of the string and the note name
appears in the BANK/MEMORY indicator.
The marks in the display shown above are
" appears in the LCD).
or
s
toward the left, indicating that the string is
slightly flat. When the string is sharp, the
marks will be on the right.
Adjust the tuning of the string and play it
again. The tuning marks in the display should
move toward the center. When they are in or
around the center, the string is in tune.
The effect block LEDs also function as
tuning indicators when the tuner is used, with
the Equalizer block LED serving as the
center tuning indicator.
3.
Go on and tune the other strings in the same
way.
USING THE BUILT-IN TUNER
GUIDED TOUR (TUTORIAL)
s
39