Tuner Mode; Using The Tuner - Yamaha MagicStomp Owner's Manual

Guitar effects processor
Hide thumbs Also See for MagicStomp:
Table of Contents

Advertisement

Tuner Mode

This mode is used for tuning your guitar. In the Tuner Mode, the MAGICSTOMP functions
as a chromatic tuner.
* The MAGICSTOMP's OUTPUT jack is muted (no sound output) when the MAGICSTOMP is in the Tuner Mode.
I Using the tuner
1
Press and hold the ON//OFF switch until the tuner display (shown below) ap-
pears on the display.
With your guitar connected to the INPUT jack, use the display to tune your guitar.
* The Tuner Mode is not available during the store operation.
2
If you want to use a standard pitch other than 440Hz, use the – or + switches.
The standard pitch can be set anywhere between 438Hz and 445Hz in the MAGICSTOMP.
3
Play the string you want to tune (play a single tone).
1. First, tune the guitar until the name of the note you want to tune to appears on the display.
2. When the string's pitch is low,
When the string's pitch is high,
The string's pitch is in tune when "
lamp is lit.
4
Press the ON/OFF switch to return to the original display.
00000>|
0000>0|
000>00|
00>000|
20
TUNE0PITCH:440Hz
00:000000|000000
>
mark will be displayed and the – switch's lamp will be lit.
<
mark will be displayed and the + switch's lamp will be lit.
>|<
" appears in the display and the ON/OFF switch's
In Tune!
TUNE0PITCH:440Hz
E0:00000>|<
Note Name
Standard Pitch
|000<
|00<
|0<
|<

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents