Yamaha GW50 Owner's Manual page 18

In Song/Pattern mode: For decreasing the
value at the cursor position (for example,
Tempo or Pattern).
In Memory mode: For moving backward through
the effect programs, one by one (when the
cursor arrow is not shown in the display).
In Manual and Memory Edit mode (sub pa-
rameters, MIN VOL, and AUTO VOL): For
decreasing the value of the selected sub
parameter (when the cursor arrow is at the
bottom of the display).
• With [SHIFT] (in the Song/Pattern modes):
For turning the sound of the Backing Accompa-
niment on and off, while the song or pattern is
playing.
^
• For increasing a selected parameter value (as
described for the modes below). Hold down for
rapid operation.
In Song/Pattern mode: For increasing the value
at the cursor position (for example, Tempo
or Pattern).
In Memory mode: For moving forward through
the effect programs, one by one (when the
cursor arrow is not shown in the display).
In Memory Edit mode (sub parameters, MIN
VOL, and AUTO VOL): For increasing the
value of the selected sub parameter (when the
cursor arrow is at the bottom of the display).
• With [SHIFT] (in the Song/Pattern modes):
For turning the sound of the Backing Bass on
and off, while the song or pattern is playing.
&6
• In Song/Pattern modes: For moving the cursor
arrow in the display.
• With [SHIFT] (in Song/Pattern modes): For
turning the sound of the Backing Drums on and
off, while the song or pattern is playing.
PANEL CONTROLS AND TERMINALS
*
• For switching between the Song and Pattern
modes. The LED of the selected function lights.
• With [SHIFT]: For enabling realtime recording
of a song (the LED flashes to indicate record
standby). (See pages 37, 84.)
(
• For starting/stopping the Backing Song or
Pattern (the LED flashes).
• With [SHIFT]: For enabling the Repeat func-
tion. (See pages 92, 93.)
)
• Similar to [SHIFT], for selecting the secondary
(lower) functions of the Chord buttons. The
arrow mark pointing right (printed with the
button name) indicates the direction in which
the appropriate buttons can be found. (For
details on this and other chord-related functions,
refer to pages 74-76.)
q
• For selecting the chord root note, or (after
pressing [CHORD] + [on/ROOT]) for select-
ing the bass note.
• With [CHORD]: For selecting the chord type.
w
• In Song mode (step recording): For recording or
entering event data to a song.
• With [CHORD]: For enabling selection of the
bass note.
PANEL CONTROLS AND TERMINALS
9