Top Panel - Yamaha GW50 Owner's Manual

PANEL CONTROLS AND TERMINALS

TOP PANEL

2
1
• For selecting the different effect types available
in each effect block. These are active only in the
Manual and Memory Edit modes. (See pages 26,
44.)
2
• For adjusting the main parameters of the ef-
fects. These are active only in the Manual and
Memory Edit modes. (See page 26.)
3
• The Pedal Switches have different functions
depending on the mode selected.
In Manual mode: For turning individual effect
blocks (or groups) on and off. (See page 11.)
In Memory mode: For selecting effect pro-
grams and changing the banks of the effect
programs. (See page 11.) Also, when AS-
SIGNABLE Pedal Switch has been pressed
twice quickly, for turning individual effect
blocks (or groups) on and off. (See page 11.)
6
PANEL CONTROLS AND TERMINALS
s
4
5 6 7 8 9 10 11 12 13
1
3
In Memory Edit mode: For selecting which
effect blocks are active in an effect program.
(See page 11.)
In Pattern mode: For performing various
control functions, such as (when BACKING
CONTROL is selected) selecting patterns,
starting or stopping a pattern, or (in CHORD
RECALL) changing to pre-assigned chords.
(See page 12.)
In Song mode (playback): For performing
various control functions, such as: selecting
songs, fast forwarding/rewinding within a
song, starting/stopping songs. (See page 13.)
In Song mode (recording): For starting or
stopping song recording and selecting pre-
assigned chords. (See page 13.)
• The REVERB/DELAY Pedal Switch is also
used as a delay time tap control. (See page 67.)
For more information on the Pedal Switches, see the
boxed section "ASSIGNABLE BLOCK AND PEDAL
SWITCH FUNCTIONS" on pages 10-14.
21
20
14 15 16
17 18
22
19
23
24