Tuner Mode - Yamaha GW50 Owner's Manual

The built-in Tuner lets you tune
your instrument simply and quickly
without having to remove it from
the INPUT jack.
Operation —
1.
Simultaneously hold down [SHIFT] and press
[TUNER] (or simultaneously press and hold
down Pedal Switches 1 and 2 until the Tuner
mode display "PITCH" appears in the LCD).
The output sound is automatically cut off
when the Tuner is turned on, so that you
can tune your guitar silently on stage.
HINT
2.
Play only one string on the guitar.
The number of the string (when one of the
open strings — E, A, D, G, B, or E — is
played) and the note name appears in the
BANK/MEMORY indicator. The tuning is
indicated both in the Measure/Event section
of the LCD and by the red LEDs of the effect
blocks, as shown below.
The indications here show that the tuning is flat.

TUNER MODE

s
OTHER FUNCTIONS
Note: The flashing dot in the BANK/MEMORY in-
dicator represents "
3.
Tune the string so that the indicators are in
the center as much as possible.
The tuning is made for a standard pitch of A
= 440Hz (as shown in the display). However,
this can be adjusted up to 445 Hz if you wish
by using the [–]/[+] buttons. (The pitch of the
backing tracks is also raised by this opera-
tion.) The last setting mode is retained even
after the power is turned off.
4.
Continue in the same way with the other
strings.
5.
Return to normal operation by pressing any
of the mode buttons (or any of the Pedal
Switches).
The illustration below shows the various
tuning indications both in the Measure/Event
section of the LCD and in the effect block
LEDs, along with the amount in cents away
from normal pitch.

TUNER MODE

s " or "sharp".
s
99
TUNER MODE