Introduction; Cc3200 Sensortag; Hardware Description; Rf Function And Frequency Range - Texas Instruments SimpleLink Wi-Fi SensorTag CC3200 User Manual

Hide thumbs Also See for SimpleLink Wi-Fi SensorTag CC3200:
Table of Contents

Advertisement

Introduction

1 Introduction

1.1 CC3200 SensorTag

The high-performance CC3200 device is the industry's first single-chip microcontroller (MCU) with built-in Wi-Fi
connectivity for easy system application. Created for the Internet of Things (IoT), the SimpleLink
device is a wireless MCU that integrates a high-performance ARM
develop an entire application with a single device. With on-chip Wi-Fi, internet, and robust security protocols, no
prior Wi-Fi experience is needed for fast development.
The CC3200 SensorTag is a low-cost IoT demo platform for ARM
SensorTag design highlights the Internet-on-a chip
features programmable user buttons, LEDs, reed relay, digital microphone, and a buzzer for user interaction.
Onboard sensors, gyroscope, accelerometer, and compass allow for easy environmental sensing and IoT
applications.
Figure 1-1
shows the CC3200 SensorTag.
The CC3200 Wi-Fi SensorTag is intended for demonstration purposes only. For Wi-Fi development and
prototyping, TI recommends the
Sensortag that can be used for development, download the
SDKs
and use the example for CC3220SF called "mqtt_sensor". This example requires the
BoosterPack Plug-In Module

2 Hardware Description

2.1 RF Function and Frequency Range

The CC3200 SensorTag device is designed to operate in the WLAN 2.4-GHz band. The CC3200 SensorTag
device also supports Channels 1 through 11 (2142 MHz to 2462 MHz). The SensorTag design uses the
SimpleLink Wi-Fi CC3200 Internet-on-a chip device (see
Design
Files).
The maximum RF power transmitted in each WLAN 2.4-GHz band is 16.5 dBm (EIRP power).
2
SimpleLink™ Wi-Fi® SensorTag
solution and Wi-Fi capabilities. The CC3200 SensorTag
CC3220SF LaunchPad development
for sensor data.
Figure 1-1. CC3200 SensorTag
Note
Copyright © 2020 Texas Instruments Incorporated
®
®
Cortex
-M4 MCU that allows customers to
®
®
Cortex
-M4F-based microcontrollers. The
kit. For a similar example to the CC3200
Sensor and Actuator Plugin for SimpleLink MCU
CC3200 SimpleLink™ Wi-Fi® and IoT SensorTag
SWRU513B – FEBRUARY 2017 – REVISED JULY 2020
www.ti.com
Wi-Fi CC3200
Sensors
Submit Document Feedback

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SimpleLink Wi-Fi SensorTag CC3200 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Cc3200stk-wifimk

Table of Contents