Replacing The Batteries - Texas Instruments SimpleLink Wi-Fi SensorTag CC3200 User Manual
Hide thumbs
Also See for SimpleLink Wi-Fi SensorTag CC3200:
- Technical reference manual (572 pages) ,
- Programmer's manual (73 pages) ,
- User manual (29 pages)
Table of Contents
Advertisement
www.ti.com
The IP address can be used to configure the Wi-Fi setup for advanced settings through a web browser.
Alternatively, the Wi-Fi SensorTag can be accessed by typing sensortag.net in the browser. Advanced
Wi-Fi settings can be configured in the profiles tab. (see
Pressing both buttons simultaneously for 6 seconds resets the SensorTag and deletes all the Wi-Fi settings. The
SensorTag can now be configured as a new device.
3.6 Replacing the Batteries
To replace the battery, follow these steps:
1. Remove the red rubber casing and plastic casing as shown in
2. Remove and replace batteries.
SWRU513B – FEBRUARY 2017 – REVISED JULY 2020
Submit Document Feedback
Figure
Figure 3-8. Sensortag.net Snippet
Figure 3-9. Replacing the Batteries
Copyright © 2020 Texas Instruments Incorporated
3-8).
Figure
3-9.
SimpleLink™ Wi-Fi® SensorTag
Operation Description
7
Advertisement
Table of Contents
Need help?
Do you have a question about the SimpleLink Wi-Fi SensorTag CC3200 and is the answer not in the manual?