Connecting The Sensortag To Your Local Wi-Fi Network - Texas Instruments SimpleLink Wi-Fi SensorTag CC3200 User Manual

Hide thumbs Also See for SimpleLink Wi-Fi SensorTag CC3200:

Table of Contents

www.ti.com

3.3 Connecting the SensorTag to Your Local Wi-Fi Network

On the Sensor View screen, the SensorTag data is displayed (see

sensor view is 1 second. After 90 seconds of inactivity, the SensorTag emits a short beep and enters hibernate

mode to save power. Press any button to wake up the SensorTag.

To view the sensor data directly in the Cloud, follow the Cloud URL. The SensorTag will now send data directly to

the IBM

quickstart cloud using MQTT.

These data are sent directly without any security or encryption enabled.

SWRU513B – FEBRUARY 2017 – REVISED JULY 2020

Submit Document Feedback

Figure 3-4. New Device Found

Figure 3-5. SensorTag Sensor Data

Note

Figure

3-5). The default update interval for the

SimpleLink™ Wi-Fi® SensorTag

Operation Description

Table of Contents

Do you have a question about the SimpleLink Wi-Fi SensorTag CC3200 and is the answer not in the manual?

Cc3200stk-wifimk