Connections; Connectors - Yamaha AVANT GRAND N1 Owner's Manual

Connectors

CAUTION
Before connecting the instrument to other electronic components, turn off the power to all the
components. Before turning the power on or off to all components, set all volume levels to
minimum (0). Otherwise, electrical shock or damage to the components may result.
q
Front
(keyboard
side) 
Refer to the "Panel Controls and Terminals" on page 8 for information
on the location of the connectors.
q
AUX IN [L/L+R] [R] jacks
The stereo outputs from another instrument can be connected to these jacks,
allowing the sound of an external instrument to be reproduced via the N1's
speakers. Refer to the diagram below and use audio cables to make the connec-
tions.
CAUTION
When the instrument's AUX IN jacks are connected to an external device, first turn on the
power to the external device, then to the instrument. Reverse this order when you turn the
power off.
Instrument
AUX IN
phone plug
(standard)
AUX IN
phone plug
(standard)

Connections

w e
Tone Generator
audio cable
OUTPUT
phone plug
(standard)
audio cable
 Rear
Use only the AUX IN [L/L+R] jack for con-
nection with a mono device.
AUX OUT
phone plug
(standard)
N1 • 31
Owner's Manual