Recording To Right/Left; Settings - Yamaha Clavinova CLP-265GP Owner's Manual

Yamaha musical instrument owner's manual clp-265gp
Hide thumbs Also See for Clavinova CLP-265GP:
Table of Contents

Advertisement

Recording to RIGHT/LEFT

This lets you record the right and left parts separately. Since you can record the left part while play-
ing back the right, this is useful for recording both parts of a duet.
Procedure
1.
Make all the initial settings.
Same as step 1 in "Recording a performance quickly" on page 28.
2.
Select a song to record.
Press the
[SONG SELECT]
buttons to select a song for recording.
[–/NO][+/YES]
CAUTION
To avoid erasing previously recorded song(s):
If the song contains data, the part indicator lights up green when you select a song.
Note that recording new data on this part will erase the existing data.
3.
Engage Record Ready mode.
Press the
button and press the
[REC]
Ready mode. Recording does not actually start yet.
The amount of memory available for recording will be shown on the LED dis-
play in approximate kilobytes. The
the current METRONOME tempo setting.
Record Ready mode can be disengaged before recording by pressing the
button again.
4.
Start and stop recording.
Same as step 3-5 in "Recording a performance quickly" on page 29.
button to light "USER" indicator on, then press the
button to engage Record
[RIGHT]/[LEFT]
SONG [PLAY/PAUSE]
Part button indications
Off: Contains no data
On (green): Contains data
On (red): Part is enabled for
recording
The amount of memory avail-
able for recording:
This value in kilobytes (a unit
used of measurement for data)
indicates how much space
remains available for recording
on the Clavinova. You can
record up to a maximum of
about 11,000 notes on the
CLP-265GP depending on pedal
usage and other factors.
If the metronome was on when
you started recording, you'll be
able to keep time with the met-
ronome while recording, but
the metronome sound will not
be recorded.
If you want to change the
tempo, time signature, reverb
type, or effect type when rere-
indicator will flash at
cording a part or when record-
ing to another part, do so after
entering Record Ready mode.
[REC]
If you don't want to hear the
previously recorded part while
you record (for example, when
you want to record a song dif-
ferent from what you recorded
on the previous part), press
the playback part button
before pressing the [REC] but-
ton so that its indicator is
turned off.
For more information on
recording, see page 32.
Recording Your Performance
NOTE
NOTE
NOTE
NOTE
NOTE
NOTE
CLP-265GP Owner's Manual
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents