F4. Other Functions; F5. Metronome Volume; F6. Song Part Cancel Volume - Yamaha Clavinova CLP-265GP Owner's Manual

Detailed Settings – [FUNCTION]

F4. Other Functions

This section provides a variety of other func-
tions, including letting you assign the opera-
tion of the left pedal to one of several modes,
and allowing you to select specific song chan-
nels for playback.
1. Engage the Function mode and select
2. Press the [+/YES] button to engage the other
functions' sub-mode, then use the [TEMPO/
FUNCTION# ▼, ▲] buttons to select the
desired sub-mode.
Press the [–/NO] or [+/YES] button to select
the desired pedal function or assign the val-
ues.
Sub-mode
F4.1 Left Pedal Mode
Setting range:
1. Soft Pedal
The soft pedal reduces the volume and slightly
changes the timbre of notes played while the pedal is
pressed. The soft pedal will not affect notes that are
already playing.
2. Song Play/Pause
This mode allows you to start or pause song playback.
In this mode, the Left Pedal functions in the same
manner as the
panel.
F4.2 Soft Pedal Effect Depth
Setting range:
Normal setting: 3
This function sets the depth of the soft pedal effect.
F4.3 Song Channel Selection
Setting range:
Normal setting: ALL
The setting here only affects non-protected External
songs. You can specify which song channels will play
back on this instrument. When "ALL" is selected, chan-
nels 1-16 will be played back. When "1&2" is selected,
only channels 1 and 2 will be played back, while channels
3-16 will be transmitted via MIDI.
42
CLP-265GP Owner's Manual
button on the
SONG [PLAY/PAUSE]
1 – 5
ALL, 1&2

F5. Metronome Volume

You can change the volume of the metronome
sound.
Use this function to adjust the metronome vol-
ume.
1. Engage the Function mode and select
.
2. Use the [–/NO] and [+/YES] buttons to set the
metronome volume as required.
Setting range:
Normal setting: 10
SHORTCUT:
You can jump directly to the metronome functions
pressing the [TEMPO/FUNCTION#] button while holding the
METRONOME [ON/OFF] button.
To exit the Function mode, you still need to press the
[TEMPO/FUNCTION#] button so that the TEMPO indicator
lights up.

F6. Song Part Cancel Volume

This function sets the volume at which a "can-
celed" part is played during song playback.
Adjust the part volume to a comfortable level
and use the "canceled" part as a guide with
which to play along.
1. Engage the Function mode and select
2. Use the [–/NO] and [+/YES] buttons to set the
volume as required.
Setting range:
Normal setting: 5
This function cannot be used for Demo songs.
1 – 20
NOTE
0 – 20
NOTE
.
by
.